Hydraulic Fitting
Straight Coupling
Equal Elbow
Equal TEE
Equal Cross
Bulk Head Union
Bulk Head ElbowUnion
Male Stud Coupling
Male Elbow
Male Branch TEE
Swivel Elbow
Banjo Elbow
Caps
Clamps
Clamp Introduction
“J.J” Pipe Clamp & Mounting Systems
- Designed and manufactured as per DIN 3015 part of 1,2 & 3.
- Ensures a simple, reliable dampening support for tube, pipe, hoses and conduits.
- Absorbs vibrations.
- Reduce noise level.
- Provides rigid support to the piping.
- Reduces chances of leakage due to loosening of joints.
Application
- Industrial Hydraulics
- Mobile Hydraulics
- Marine Hydraulics
- Offshore
- General Industrial Pipe Construction
- Mining Industry
- Nuclear Reactor Construction
- Instrumentation and Control Technology
- Pneumatics
Specification
Jaws
- Poly Propylene
- Poly Amide / Poly Amide GR
- Aluminium
Top & Bottm Plate
- M.S Yellow plated / phosphatised
- S.S in natural finish
Bolts
- M.S Yellow plated / phosphatised
- S.S in natural finish
Standards Series
- Sizes 6 mm od to 50.4 mm od
- Recommends upto 1500 psi systemd and no dynamic loads A
Heavy Duty Series
- Sizes 6mm to 214mm od
- Recomends for system where pressure is above 1500 & psi & pressure
- Surges
- Combination of pressure surges & tempareture requires double clamps
Twin Clamp
- Sizes upto 1%” od
- Recommends upto 1500 psi systemd and no dynamic loads
Rubber Insert Clamps
- Sizes upto 1½” od in standard series
- Sizes upto 5″ od in heavy series
- Recommend for hoses, electrical cables etc.
Clamp Introduction
“J.J” Pipe Clamp & Mounting Systems
- Designed and manufactured as per DIN 3015 part of 1,2 & 3.
- Ensures a simple, reliable dampening support for tube, pipe, hoses and conduits.
- Absorbs vibrations.
- Reduce noise level.
- Provides rigid support to the piping.
- Reduces chances of leakage due to loosening of joints.
Application
- Industrial Hydraulics
- Mobile Hydraulics
- Marine Hydraulics
- Offshore
- General Industrial Pipe Construction
- Mining Industry
- Nuclear Reactor Construction
- Instrumentation and Control Technology
- Pneumatics
Specification
Jaws
- Poly Propylene
- Poly Amide / Poly Amide GR
- Aluminium
Top & Bottm Plate
- M.S Yellow plated / phosphatised
- S.S in natural finish
Bolts
- M.S Yellow plated / phosphatised
- S.S in natural finish
Standards Series
- Sizes 6 mm od to 50.4 mm od
- Recommends upto 1500 psi systemd and no dynamic loads A
Heavy Duty Series
- Sizes 6mm to 214mm od
- Recomends for system where pressure is above 1500 & psi & pressure
- Surges
- Combination of pressure surges & tempareture requires double clamps
Twin Clamp
- Sizes upto 1%” od
- Recommends upto 1500 psi systemd and no dynamic loads
Rubber Insert Clamps
- Sizes upto 1½” od in standard series
- Sizes upto 5″ od in heavy series
- Recommend for hoses, electrical cables etc.
